You need to have the IP address, to access your Netgear Orbi RBK20 router. Along with the IP address you also need a username and password. Moreover, you need a web domain to replace the IP address if it fails to access the login window.
Such information is available in the user manual. Or you can check the product manual of your Netgear Orbi RBK20 router. If you are unwilling to read the entire manual, then follow the quick setup guide. To the Orbilogin.com login page of your router, connect to the router’s network.
Orbi RBK20 Tri-band RouterLogin Guide
- Unlock and launch a web browser. For example, Google Chrome, Firefox, Opera, and Microsoft Edge. You can even go for Safari or any other browser of your choice.
- At the address bar of the web browser, type 192.168.1.1. Which is the default IP address to access the Orbi admin page interface.
- If the IP address is not working, then enter the web domain of your Netgear Orbi router. Enter Orbilogin.com into the address field of the internet browser.
- In this way, you can access the router’s web-based user interface. But if you fail to access the interface, then you need to reset your device.
- You must see two different authentication tabs. Here you should enter the username and the password.
- If you want to use the default login information. Then the default username for your Netgear Orbilogin system is admin. The default Orbilogin password is password.
- As you enter the username & password, tap the “Enter” button. And now you will see the control panel of your Netgear Orbi router.
What if the default Orbi RBK20 login username and password do not work?
If the above orbilogin.com credentials do not work, then you may try the most common one. You can use any one of the following given information. All the information provided here is the most commonly used default Orbi login credentials. These usernames and passwords are used by Netgear Orbi Mesh system users.
Try different/ID password combinations that are frequently used by Netgear. The list given here contains the most popular default username and password combinations. you can access the router’s web-based interface very easily. Just use anyone from the following username and password combination,
Username Password
- Admin password
- Admin 1234
- 1234 1234
- Admin Admin
- Admin (Blank)
- (Blank) Password
- (Blank) 1234
- 1234 (Blank)
What if Orbi login IP address 192.168.0.1 does not work?
If your Orbi login default IP address is not working. And it fails to redirect you to the Netgear orbilogin.com login page, try the following IP addresses.
In the given list of the below section, we have mentioned some commonly used IP addresses by Netgear Orbi users. Most of the Netgear manufacturers use these IP addresses.
They use it as the default factory configuration address for their WIFI routers. If 192.168.0.1 fails to access the Orbi login page, you don’t need to panic at all. You have lots of other options to apply.
Orbi Default Router IP addresses
1. 192.168.1.1
2. 192.168.0.1
3. 192.168.0.100
4. 192.168.100.1
5. 192.168.1.250
6. 192.168.0.227
7. 192.168.0.101
8. 192.168.61.1
9. 192.168.0.202
10. 192.168.0.240
What if nothing works and fails to access Orbilogin.com?
Have you been tired of trying different methods to login into your Netgear Orbi Router? Then all you need to do is to reset your Orbi Router and the modem. A reset can be done easily by pressing the reset button. Which is available at the back or the bottom of your Netgear Orbi router.
- If you hold down this small reset button for approximately 10 to 20 seconds.
- Then your Orbi router and the modem will get restored to the factory default configuration.
- You just need a toothpick, or a paperclip, or a matchbox.
- Just keep in mind some most important things while performing the reset process.
- When you reset your modem or the router, you will lose your WIFI connection.
- And then the router or the modem will go offline.
- So it is, therefore, better to get an expert’s assistance or advice in this regard.
Note: If you lack the required information. Then it is recommended that you should seek guidance from a person who has all the knowledge about this process. Lack of information can hamper your Orbilogin.com process.
After resetting your Orbi router will return to its default factory settings. Now, you have to perform the Netgear Orbi login process once again. You can just follow the process mentioned in the top section of this article. You can contact us anytime you need. Anytime when you face an orbilogin.com login issue. Just dial our toll-free numbers and get the best results.